DieselSite 7.3L Powerstroke Water Pump with Coolant Filter

• New OEM Navistar thermostat
• Custom lifetime silicon lower radiator hose
• All plumbing hardware for conversion
• 3 Baldwin 5134 Coolant Filters
  
• High-quality bolts for installation

If you have a 95-97 truck, you can use your stock "OEM" thermostat housing and upper radiator hose. If you wish to use our billet thermostat housing and upper hose, simply add it to your order.

Special Note: If you are purchasing the new upper radiator hose with housing, please read!
This new hose routes very close to the drive belt if you are not careful during installation. The tip is to install the end on the thermostat housing first. Do not tighten the clamp yet. If the hose appears to be hitting the drive belt, rotate it clockwise a few degrees at a time until it clears the belt. Connect the other end of the radiator and check the belt clearance again. Tighten clamps.
 
*Many 1994-1995 7.3L Powerstrokes came equipped with IDI cooling systems. If you have a steel radiator and the cap is on the radiator, this kit will not work. You must have the later cooling system with the plastic expansion tank and the plastic radiator cap in the expansion tank.