MDP OBS 7.3 "Hutch Mod" DIY Kit

Tired of quarter tank and suction issues from your OEM sending units? Our kit will solve all your related issues. Everything you need for both tanks is included! This is a popular upgrade to be done at the same time as an e-fuel conversion. 

Includes 2x stainless union, 2x pre-bent T304 stainless tubing sections.

1. Remove your OEM sending unit, the 'showerhead' pickup (if it hasn't already fallen off), and measure the distance to the bottom of your tank.
2. Compare your measurement with the length of the sending unit and our stainless 90 to determine if any of the pickup tube needs to be removed for proper fitment (it doesn't have to be perfect, the union supplied gives you ~1/4" of wiggle room).
3. Test fit your modified sending unit with the 90 installed (don't completely tighten the union, but make sure it's snug) to verify that the new pickup is touching or almost touching the bottom of your tank, remove and adjust as needed.
4. Once you have verified that everything is where it needs to be, tighten the union, and you're done!

Instructions will be sent with each kit and the install procedure is also available on our blog.